VOLVO
TCM-P0B0C00 - Auxilliary Transmission Fluid Pump Hydraulic Leakage. General Failure Information. No sub type information
System
Transmission Control Module (TCM)
Volvo models this fault code applies to
Applies to the following models:
7 modelsS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)
Show models by year and engine (16)
- Volvo S60 (2011–)2012Engine D5204T3 only · Transmission TF-80SD only
- Volvo S60 (2011–)2013–2014Engine B5204T8, B5204T9, D5204T3, D5204T7 only · Transmission TF-80SD only
- Volvo S60 (2011–)2015Engine D5204T3, D5204T7 only · Transmission TF-80SD only
- Volvo S80 (2007–)2012, 2015Engine D5204T3 only · Transmission TF-80SD only
- Volvo S80 (2007–)2013–2014Engine D5204T3, D5204T7 only · Transmission TF-80SD only
- Volvo V40 (2013–)2013All engines except: B4164T, B4164T3, D4162T · Transmission TF-80SD only
- Volvo V40 (2013–)2014All engines except: B4164T, B4164T3, B4164T4, D4162T · Transmission TF-80SD only
- Volvo V40 (2013–)2015Engine B5204T8, B5204T9, D5204T6 only · Transmission TF-80SD only
- Volvo V40 Cross Country (2013–)2013–2014All engines except: B4164T, D4162T · Transmission TF-80SD, TF-80SD AWD only
- Volvo V40 Cross Country (2013–)2015All engines except: B4164T, B4204T11, D4162T, D4204T14 · Transmission TF-80SD, TF-80SD AWD only
- Volvo V60 (2011–)2012Engine D5204T3 only · Transmission TF-80SD only
- Volvo V60 (2011–)2013–2014Engine B5204T8, B5204T9, D5204T3, D5204T7, D82PHEV only · Transmission TF-80SD only
- Volvo V60 (2011–)2015Engine B5204T9, D5204T3, D5204T7, D82PHEV, D87PHEV only · Transmission TF-80SD only
- Volvo V70 (2008–)2012Engine D5204T3 only · Transmission TF-80SD only
- Volvo V70 (2008–)2013–2015Engine D5204T3, D5204T7 only · Transmission TF-80SD only
- Volvo XC60 (2009–)2015Engine B5204T9 only · Transmission TF-80SD AWD only
What does this fault code mean?
Although the fault code is named hydraulic leakage, it points to a mechanical defect in the electric oil pump in the transmission. The transmission control module (TCM) has detected that the pump cannot guarantee sufficient oil pressure. The pump is used while automatic engine start/stop is active, to prevent pressure drops in the gearbox.
Possible causes
- Internal fault in the electric oil pump
What you can do
- 1Read and note the fault code, clear it and drive the car to see if it returns
- 2Check that the connectors to the oil pump and system relay are free from oxidation and loose connections
- 3Have a workshop check the system relay and the voltage cable to the oil pump for an open circuit, and replace the electric oil pump if the fault remains
Symptoms you may notice2
- Automatic engine start/stop does not work while driving
- Automatic engine start/stop does not work at idle
General guidance for car owners. Diagnosis on the car can point to a different cause.