VOLVO
TCM-P175A68 - Transmission Fluid Over Temperature Condition - Electromagnetic Oil Pump "EMOP" Disabled. Algorithm Based Failures. Event information
System
Transmission Control Module (TCM)
Volvo models this fault code applies to
This fault code has different meanings depending on model, model year or engine. Select the meaning that applies to your car.
Applies to the following models:
9 modelsS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Show models by year and engine (9)
- Volvo S60 (2011–)2014–2015Transmission TG-81SC only
- Volvo S80 (2007–)2014–2015Transmission TG-81SC only
- Volvo V40 (2013–)2015Transmission TG-81SC only
- Volvo V40 Cross Country (2013–)2015Transmission TG-81SC, TG-81SC AWD only
- Volvo V60 (2011–)2014–2015Transmission TG-81SC only
- Volvo V60 Cross Country (2015–)2015Transmission TG-81SC only
- Volvo V70 (2008–)2014–2015Transmission TG-81SC only
- Volvo XC60 (2009–)2014–2015Transmission TG-81SC only
- Volvo XC70 (2008–)2014–2015Transmission TG-81SC only
What does this fault code mean?
The fault code is event controlled and does not indicate a fault in the control module; it is designed as information. It shows that the gearbox oil has become too hot, and that the electromagnetic oil pump (EMOP) can therefore be switched off. The code does not come from a fault that has to be repaired.
Possible causes
- The gearbox oil has overheated and stayed hot for a long time
What you can do
- 1The code is informative and does not indicate a fault in the control module. Read and note it if you wish
- 2If the code comes back often, have a workshop check the transmission oil level and quality
Symptoms you may notice2
- Automatic engine start/stop does not work while driving
- Automatic engine start/stop does not work at idle
What the fault can affect1
- The function for automatic engine start/stop is switched off
General guidance for car owners. Diagnosis on the car can point to a different cause.