VOLVO
TCM-P193B00 - Throttle/Pedal Signal. General Failure Information. No sub type information
System
Transmission Control Module (TCM)
Volvo models this fault code applies to
Applies to the following models:
10 modelsS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Show models by year and engine (33)
- Volvo S60 (2011–)2011Engine B4164T, B4204T6, B4204T7 only · Transmission MPS6 only
- Volvo S60 (2011–)2012All engines except: B5254T5, B6304T4, D5244T11, D5244T15 · Transmission MPS6, TF-80SD only
- Volvo S60 (2011–)2013All engines except: B5254T12, B5254T14, B6304T4, D5244T11, D5244T15 · Transmission MPS6, TF-80SD only
- Volvo S60 (2011–)2014–2015Transmission MPS6, TF-80SD, TG-81SC only
- Volvo S80 (2007–)2009Engine B4204S4 only · Transmission MPS6 only
- Volvo S80 (2007–)2010Engine B4204S4, B4204T6 only · Transmission MPS6 only
- Volvo S80 (2007–)2011Engine B4164T, B4204S4, B4204T6, B4204T7 only · Transmission MPS6 only
- Volvo S80 (2007–)2012Engine B4164T, B4164T2, B4204T6, B4204T7, D4162T, D5204T3 only · Transmission MPS6, TF-80SD only
- Volvo S80 (2007–)2013Engine B4164T, B4164T2, B4204T6, B4204T7, D4162T, D5204T3, D5204T7 only · Transmission MPS6, TF-80SD only
- Volvo S80 (2007–)2014–2015Transmission MPS6, TF-80SD, TG-81SC only
- Volvo V40 (2013–)2013All engines except: B4164T3, D4162T · All transmissions except: M66
- Volvo V40 (2013–)2014All engines except: B4164T3, B4164T4 · All transmissions except: M66
- Volvo V40 (2013–)2015All transmissions except: M66
- Volvo V40 Cross Country (2013–)2013All engines except: D4162T · All transmissions except: M66
- Volvo V40 Cross Country (2013–)2014–2015All transmissions except: M66
- Volvo V60 (2011–)2011Engine B4164T, B4204T6, B4204T7 only · Transmission MPS6 only
- Volvo V60 (2011–)2012All engines except: B6304T4, D5244T11, D5244T15 · Transmission MPS6, TF-80SD only
- Volvo V60 (2011–)2013All engines except: B6304T4, D5244T11, D5244T15, D5244T17 · Transmission MPS6, TF-80SD only
- Volvo V60 (2011–)2014–2015Transmission MPS6, TF-80SD, TG-81SC only
- Volvo V60 Cross Country (2015–)2015Transmission TG-81SC only
- Volvo V70 (2008–)2009Engine B4204S4 only · Transmission MPS6 only
- Volvo V70 (2008–)2010Engine B4204S4, B4204T6 only · Transmission MPS6 only
- Volvo V70 (2008–)2011Engine B4164T, B4204S4, B4204T6, B4204T7 only · Transmission MPS6 only
- Volvo V70 (2008–)2012Engine B4164T, B4164T2, B4204T7, D4162T, D5204T3 only · Transmission MPS6, TF-80SD only
- Volvo V70 (2008–)2013Engine B4164T, B4164T2, B4204T7, D4162T, D5204T3, D5204T7 only · Transmission MPS6, TF-80SD only
- Volvo V70 (2008–)2014–2015Transmission MPS6, TF-80SD, TG-81SC only
- Volvo XC60 (2009–)2010Engine B4204T6 only · Transmission MPS6 only
- Volvo XC60 (2009–)2011–2012Engine B4204T6, B4204T7 only · Transmission MPS6 only
- Volvo XC60 (2009–)2013Engine B4204T7 only · Transmission MPS6 only
- Volvo XC60 (2009–)2014Transmission MPS6, TG-81SC only
- Volvo XC60 (2009–)2015Transmission MPS6, TF-80SD AWD, TG-81SC only
- Volvo XC70 (2008–)2014–2015Transmission TG-81SC only
- Volvo XC90 (2003–)2013–2014All engines except: B5254T9 · All transmissions except: AW50/51 AWD
What does this fault code mean?
The fault code concerns the accelerator pedal position signal, which the engine control module (ECM) sends to the transmission control module over the CAN network. The signal is used for adaptation and to control the gearbox system pressure. The signal is missing or incorrect. The fault is general and does not say more precisely what type of fault it is.
Possible causes
- Damaged accelerator pedal position sensor
- Internal fault inside the engine controller (ECM)
- Internal fault inside the control module (TCM) of the gearbox
- Sporadic open or shorted CAN wire between the engine control module and the transmission control module
What you can do
- 1Read the fault codes in the CEM and the engine control module (ECM) and fix those first
- 2Do not clear this code until the other fault codes have been fixed and cleared
- 3Have a workshop check the accelerator pedal position sensor and the CAN wire between the engine controller and the gearbox controller
Symptoms you may notice5
- Poor performance, the car lacks power, especially when starting off
- Check engine light lit or behaving abnormally
- Lockup and kickdown do not work
- Gear changes harsh or jerky
- Automatic engine start/stop does not work, both while driving and at idle
What the fault can affect3
- The transmission control module uses a basic value for the signal, and adaptation is blocked
- Kickdown and neutral control are blocked
- Automatic engine start/stop is switched off, and electric propulsion is not possible
General guidance for car owners. Diagnosis on the car can point to a different cause.