TCM-P271300
VOLVO
TCM-P271300 - Unexpected Mechanical Disengagement Of C3. General Failure Information. No sub type information
System
Transmission Control Module (TCM)
Volvo models this fault code applies to
Applies to the following models:
9 modelsS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Show models by year and engine (9)
- Volvo S60 (2011–)2014–2015Transmission TG-81SC only
- Volvo S80 (2007–)2014–2015Transmission TG-81SC only
- Volvo V40 (2013–)2015Transmission TG-81SC only
- Volvo V40 Cross Country (2013–)2015Transmission TG-81SC, TG-81SC AWD only
- Volvo V60 (2011–)2014–2015Transmission TG-81SC only
- Volvo V60 Cross Country (2015–)2015Transmission TG-81SC only
- Volvo V70 (2008–)2014–2015Transmission TG-81SC only
- Volvo XC60 (2009–)2014–2015Transmission TG-81SC only
- Volvo XC70 (2008–)2014–2015Transmission TG-81SC only
What does this fault code mean?
The fault code concerns clutch C3 in the gearbox, which is controlled by line pressure solenoid SL3. The control module has detected that clutch C3 or brake B2 has not engaged correctly. The fault is general and does not say more precisely what type of fault it is.
Possible causes
- Clutch C3 or the band brake is damaged
- Contact resistance, oxidation or a loose joint at the plug of line pressure solenoid SL3
- Open circuit, short-circuit to ground or short-circuit to voltage on the cable to line pressure solenoid SL3
- Line pressure solenoid SL3 is damaged
- Internal fault in the transmission's control system or in the transmission control module (TCM)
- Mechanical fault in the gearbox
What you can do
- 1Read the fault codes in the gearbox. If other fault codes are present, fix them first, as they may be the cause
- 2Have a workshop check solenoid SL3, its connector and the cable to it for oxidation, open circuits and short-circuits
- 3Have a workshop check the transmission oil level and quality, and if the fault remains, also check clutch C3 and the band brake
Symptoms you may notice5
- Warning symbol and text message in the display
- The car lacks power
- No forward or reverse movement with a gear engaged
- No automatic gear change, and lockup does not work
- Automatic engine start/stop does not work, both while driving and at idle
What the fault can affect1
- Adaptation is blocked
General guidance for car owners. Diagnosis on the car can point to a different cause.