TCM-P271400
VOLVO
TCM-P271400 - Pressure Control Solenoid D Performance/Stuck Off. General Failure Information. No sub type information
System
Transmission Control Module (TCM)
Volvo models this fault code applies to
Applies to the following models:
7 modelsS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)
Show models by year and engine (24)
- Volvo S60 (2011–)2011Engine B4164T, B4204T6, B4204T7 only · Transmission MPS6 only
- Volvo S60 (2011–)2012–2014Engine B4164T, B4164T2, B4164T3, B4204T7, D4162T only · Transmission MPS6 only
- Volvo S60 (2011–)2015Engine B4164T, B4164T2, B4164T3, D4162T only · Transmission MPS6 only
- Volvo S80 (2007–)2009Engine B4204S4 only · Transmission MPS6 only
- Volvo S80 (2007–)2010Engine B4204S4, B4204T6 only · Transmission MPS6 only
- Volvo S80 (2007–)2011Engine B4164T, B4204S4, B4204T6, B4204T7 only · Transmission MPS6 only
- Volvo S80 (2007–)2012–2014Engine B4164T, B4164T2, B4204T6, B4204T7, D4162T only · Transmission MPS6 only
- Volvo S80 (2007–)2015Engine B4164T, D4162T only · Transmission MPS6 only
- Volvo V40 (2013–)2013Engine B4164T only · Transmission MPS6 only
- Volvo V40 (2013–)2014–2015Engine B4164T, D4162T only · Transmission MPS6 only
- Volvo V40 Cross Country (2013–)2013Engine B4164T only · Transmission MPS6 only
- Volvo V40 Cross Country (2013–)2014–2015Engine B4164T, D4162T only · Transmission MPS6 only
- Volvo V60 (2011–)2011Engine B4164T, B4204T6, B4204T7 only · Transmission MPS6 only
- Volvo V60 (2011–)2012All engines except: B6304T4, D5204T3, D5244T11, D5244T15 · Transmission MPS6 only
- Volvo V60 (2011–)2013–2014Engine B4164T, B4164T2, B4164T3, B4204T7, D4162T only · Transmission MPS6 only
- Volvo V60 (2011–)2015Engine B4164T, B4164T2, B4164T3, D4162T only · Transmission MPS6 only
- Volvo V70 (2008–)2009Engine B4204S4 only · Transmission MPS6 only
- Volvo V70 (2008–)2010Engine B4204S4, B4204T6 only · Transmission MPS6 only
- Volvo V70 (2008–)2011Engine B4164T, B4204S4, B4204T6, B4204T7 only · Transmission MPS6 only
- Volvo V70 (2008–)2012–2014Engine B4164T, B4164T2, B4204T7, D4162T only · Transmission MPS6 only
- Volvo V70 (2008–)2015Engine B4164T, B4164T2, D4162T only · Transmission MPS6 only
- Volvo XC60 (2009–)2010Engine B4204T6 only · Transmission MPS6 only
- Volvo XC60 (2009–)2011–2012Engine B4204T6, B4204T7 only · Transmission MPS6 only
- Volvo XC60 (2009–)2013–2015Engine B4204T7 only · Transmission MPS6 only
What does this fault code mean?
The fault code concerns the pressure for clutch 2, which controls the even gears. The control module has detected that the measured hydraulic pressure is lower than the requested pressure. The fault is general and does not say more precisely what type of fault it is.
Possible causes
- Low oil level in the gearbox
- Damaged pressure sensor
- Damaged power stage, solenoid CSPS2
- Solenoid CSMS2, for clutch pressure, is damaged
What you can do
- 1Have a workshop check the gearbox oil level, as a low level can cause this code
- 2Have a workshop inspect solenoids CSPS2 and CSMS2 and the pressure sensor visually for oxidation, dirt and damage
- 3If no fault is found, have a workshop replace the mechatronic unit, as the fault is then in the solenoid or the control module
Symptoms you may notice5
- Warning symbol and text message in the display
- Check engine light lit or behaving abnormally
- Gear changes take too long, or occur too early, too late or too often
- Gear changes harsh or jerky
- No automatic gear change, and no forward or reverse movement with a gear engaged
General guidance for car owners. Diagnosis on the car can point to a different cause.