VOLVO
TCM-P284100 - Shift Fork D Position Circuit Range/Performance. General Failure Information. No sub type information
System
Transmission Control Module (TCM)
Volvo models this fault code applies to
Applies to the following models:
7 modelsS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)
Show models by year and engine (24)
- Volvo S60 (2011–)2011Engine B4164T, B4204T6, B4204T7 only · Transmission MPS6 only
- Volvo S60 (2011–)2012–2014Engine B4164T, B4164T2, B4164T3, B4204T7, D4162T only · Transmission MPS6 only
- Volvo S60 (2011–)2015Engine B4164T, B4164T2, B4164T3, D4162T only · Transmission MPS6 only
- Volvo S80 (2007–)2009Engine B4204S4 only · Transmission MPS6 only
- Volvo S80 (2007–)2010Engine B4204S4, B4204T6 only · Transmission MPS6 only
- Volvo S80 (2007–)2011Engine B4164T, B4204S4, B4204T6, B4204T7 only · Transmission MPS6 only
- Volvo S80 (2007–)2012–2014Engine B4164T, B4164T2, B4204T6, B4204T7, D4162T only · Transmission MPS6 only
- Volvo S80 (2007–)2015Engine B4164T, D4162T only · Transmission MPS6 only
- Volvo V40 (2013–)2013Engine B4164T only · Transmission MPS6 only
- Volvo V40 (2013–)2014–2015Engine B4164T, D4162T only · Transmission MPS6 only
- Volvo V40 Cross Country (2013–)2013Engine B4164T only · Transmission MPS6 only
- Volvo V40 Cross Country (2013–)2014–2015Engine B4164T, D4162T only · Transmission MPS6 only
- Volvo V60 (2011–)2011Engine B4164T, B4204T6, B4204T7 only · Transmission MPS6 only
- Volvo V60 (2011–)2012All engines except: B6304T4, D5204T3, D5244T11, D5244T15 · Transmission MPS6 only
- Volvo V60 (2011–)2013–2014Engine B4164T, B4164T2, B4164T3, B4204T7, D4162T only · Transmission MPS6 only
- Volvo V60 (2011–)2015Engine B4164T, B4164T2, B4164T3, D4162T only · Transmission MPS6 only
- Volvo V70 (2008–)2009Engine B4204S4 only · Transmission MPS6 only
- Volvo V70 (2008–)2010Engine B4204S4, B4204T6 only · Transmission MPS6 only
- Volvo V70 (2008–)2011Engine B4164T, B4204S4, B4204T6, B4204T7 only · Transmission MPS6 only
- Volvo V70 (2008–)2012–2014Engine B4164T, B4164T2, B4204T7, D4162T only · Transmission MPS6 only
- Volvo V70 (2008–)2015Engine B4164T, B4164T2, D4162T only · Transmission MPS6 only
- Volvo XC60 (2009–)2010Engine B4204T6 only · Transmission MPS6 only
- Volvo XC60 (2009–)2011–2012Engine B4204T6, B4204T7 only · Transmission MPS6 only
- Volvo XC60 (2009–)2013–2015Engine B4204T7 only · Transmission MPS6 only
What does this fault code mean?
The position sensor for shift fork D shows the fork out of position, while the speed difference between the shafts is plausible for the selected gear. The code suggests the sensor reading does not match what the transmission is doing, which can show up in the gear changes.
Possible causes
- Damaged position sensor
- The sensor reports an incorrect position
- Incorrect voltage supply to the sensor
- Damaged transmission control module (TCM)
What you can do
- 1Read all transmission codes and deal with any other transmission codes first
- 2If you have a diagnostic tool: read the position sensor for shift fork D in live data during a road test and check whether the value changes unexpectedly
- 3Have a workshop measure the voltage supply to the sensors; if it is wrong, the fault is inside the control module
- 4If the values are close to the limit, have a workshop replace the mechatronic unit
Symptoms you may notice5
- The malfunction indicator lamp (check engine light) comes on or behaves abnormally
- Yellow symbol and text message in the display
- Harsh or jerky gear changes
- Gear changes take too long
- No automatic gear changes
General guidance for car owners. Diagnosis on the car can point to a different cause.