VOLVO
TCM-P300900 - Shift Performance Request - Signal Failure. General Failure Information. No sub type information
System
Transmission Control Module (TCM)
Volvo models this fault code applies to
Applies to the following models:
9 modelsS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Show models by year and engine (9)
- Volvo S60 (2011–)2014–2015Transmission TG-81SC only
- Volvo S80 (2007–)2014–2015Transmission TG-81SC only
- Volvo V40 (2013–)2015Transmission TG-81SC only
- Volvo V40 Cross Country (2013–)2015Transmission TG-81SC, TG-81SC AWD only
- Volvo V60 (2011–)2014–2015Transmission TG-81SC only
- Volvo V60 Cross Country (2015–)2015Transmission TG-81SC only
- Volvo V70 (2008–)2014–2015Transmission TG-81SC only
- Volvo XC60 (2009–)2014–2015Transmission TG-81SC only
- Volvo XC70 (2008–)2014–2015Transmission TG-81SC only
What does this fault code mean?
The transmission control module (TCM) receives no valid signal from the engine control module telling it which shift quality is requested. That signal helps the TCM choose the type of shift quality for each situation, so it uses a default value instead.
Possible causes
- The cause should be sought in the engine control module (ECM)
- Temporary breaks or a short on the CAN wire between the ECM and the TCM
What you can do
- 1Read the codes in the central electronics control module (CEM) and the engine control module first, and deal with them
- 2Do not clear this code before any codes in the CEM and the ECM are fixed and cleared
- 3If no codes are stored, have a workshop troubleshoot the CAN network
Symptoms you may notice1
- No noticeable symptoms for the driver
What the fault can affect1
- The transmission control module uses a default value for the signal
General guidance for car owners. Diagnosis on the car can point to a different cause.