VOLVO
TCM-U058803 - Invalid Data Received From Transmission Fluid Pump Module. General Failure Information. FM (Frequency Modulated) / PWM (Pulse Width Modulated) Failures
System
Transmission Control Module (TCM)
Volvo models this fault code applies to
Applies to the following models:
7 modelsS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)
Show models by year and engine (16)
- Volvo S60 (2011–)2012Engine D5204T3 only · Transmission TF-80SD only
- Volvo S60 (2011–)2013–2014Engine B5204T8, B5204T9, D5204T3, D5204T7 only · Transmission TF-80SD only
- Volvo S60 (2011–)2015Engine D5204T3, D5204T7 only · Transmission TF-80SD only
- Volvo S80 (2007–)2012, 2015Engine D5204T3 only · Transmission TF-80SD only
- Volvo S80 (2007–)2013–2014Engine D5204T3, D5204T7 only · Transmission TF-80SD only
- Volvo V40 (2013–)2013All engines except: B4164T, B4164T3, D4162T · Transmission TF-80SD only
- Volvo V40 (2013–)2014All engines except: B4164T, B4164T3, B4164T4, D4162T · Transmission TF-80SD only
- Volvo V40 (2013–)2015Engine B5204T8, B5204T9, D5204T6 only · Transmission TF-80SD only
- Volvo V40 Cross Country (2013–)2013–2014All engines except: B4164T, D4162T · Transmission TF-80SD, TF-80SD AWD only
- Volvo V40 Cross Country (2013–)2015All engines except: B4164T, B4204T11, D4162T, D4204T14 · Transmission TF-80SD, TF-80SD AWD only
- Volvo V60 (2011–)2012Engine D5204T3 only · Transmission TF-80SD only
- Volvo V60 (2011–)2013–2014Engine B5204T8, B5204T9, D5204T3, D5204T7, D82PHEV only · Transmission TF-80SD only
- Volvo V60 (2011–)2015Engine B5204T9, D5204T3, D5204T7, D82PHEV, D87PHEV only · Transmission TF-80SD only
- Volvo V70 (2008–)2012Engine D5204T3 only · Transmission TF-80SD only
- Volvo V70 (2008–)2013–2015Engine D5204T3, D5204T7 only · Transmission TF-80SD only
- Volvo XC60 (2009–)2015Engine B5204T9 only · Transmission TF-80SD AWD only
What does this fault code mean?
The transmission control module (TCM) receives faulty signals from the electric transmission oil pump. The pump maintains pressure and flow in the gearbox while the automatic engine start-stop function is active, and when the signal is faulty the TCM can switch that function off. The fault lies either in the connector or wire to the pump, or in the pump itself.
Possible causes
- Damaged connector or wire to the oil pump
- Internal fault in the electric oil pump
What you can do
- 1Check that the connector to the gearbox electric oil pump is tight and free from corrosion and damage
- 2Check that the wiring between the gearbox control module and the oil pump is not chafed or broken
- 3If nothing can be found, clear the code and see whether it returns
- 4If the fault returns, a workshop needs to assess whether the electric oil pump should be replaced
Symptoms you may notice1
- Automatic engine start-stop does not work, both when driving and at idle
General guidance for car owners. Diagnosis on the car can point to a different cause.