VOLVO
BCM-0041 - Wheel sensor right rear. Faulty signal
Układ
Sterownik układu hamulcowego (BCM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
10 modeliC30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), S80 (1999–2006), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Pokaż modele wg rocznika i silnika (21)
- Volvo C30 (2007–2013)2007–2011
- Volvo C30 (2007–2013)2012Wszystkie silniki oprócz: D4162T, D5204T, D5204T5
- Volvo C30 (2007–2013)2013Tylko silnik: B4204S3, B4204S4, B5254T7
- Volvo C30 Electric (2011–2013)2011–2013
- Volvo C70 (2006–2013)2006–2011
- Volvo C70 (2006–2013)2012–2013Tylko silnik: B5254T7
- Volvo S40 (2004–2013)2004–2010
- Volvo S40 (2004–2013)2011–2012Wszystkie silniki oprócz: D4162T, D5204T, D5204T5
- Volvo S60 (2001–2009)2002–2009
- Volvo S80 (1999–2006)2002–2006
- Volvo V50 (2004–2013)2004–2010
- Volvo V50 (2004–2013)2011–2012Wszystkie silniki oprócz: D4162T, D5204T, D5204T5
- Volvo V70 (2000–2008)2002–2008
- Volvo V70 XC / XC70 (2001–2007)2002–2007
- Volvo XC90 (2003–)2003–2004, 2015
- Volvo XC90 (2003–)2005–2006Wszystkie silniki oprócz: B8444S
- Volvo XC90 (2003–)2007Tylko silnik: B5254T2, D5244T4
- Volvo XC90 (2003–)2008–2010Wszystkie silniki oprócz: B6324S, B8444S
- Volvo XC90 (2003–)2011Wszystkie silniki oprócz: B6324S5, B8444S
- Volvo XC90 (2003–)2012Wszystkie silniki oprócz: B6324S5
- Volvo XC90 (2003–)2013–2014Tylko silnik: B5254T9
Co oznacza ten kod błędu?
The brake control module (BCM) has registered that the right rear wheel behaves implausibly compared with the other wheels, for example stopping, turning too slowly or changing speed too quickly. The cause usually lies in the mechanics around the wheel, such as the brake or the wheel bearing. The code can only be diagnosed while driving.
Możliwe przyczyny
- The wheel locked while driving, for example due to a sticking brake caliper
- Loose wheel sensor or incorrect gap between sensor and tone ring
- Wheel bearing play or axle vibration
- Defective or dirty tone ring
- Defective wheel sensor
- Dirt between the tone ring and the wheel sensor
Co możesz zrobić
- 1Check that the brake caliper on the right rear wheel is not sticking and that the wheel turns freely
- 2Check the wheel bearing for play and noise
- 3Check that the wheel sensor sits firmly against the spindle or hub with no dirt underneath
- 4Check that the magnetic tone ring is securely fitted and complete, with no scratches or missing teeth
- 5Clear the code and road test; if it returns, have a workshop check the sensor with diagnostic equipment. Do not replace the brake control module because of this code
- 6The brake system is safety critical: the brakes work without ABS, so avoid hard braking until the fault is fixed
Objawy, które możesz zauważyć5
- General warning lamp on
- ABS warning lamp on
- ABS, traction control and stability function do not work
- Anti-skid does not work
- With an intermittent fault the ABS lamp may only go out some way into the next drive
Na co może wpływać usterka3
- ABS, traction control and stability control are disabled
- Electronic brake force distribution (EBD) is disabled if two or more wheel sensors have failed
- Brake assist and active yaw control (AYC) are disabled
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.