VOLVO
BCM-0057 - Power supply. Voltage too low
Układ
Sterownik układu hamulcowego (BCM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
10 modeliC30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), S80 (1999–2006), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Pokaż modele wg rocznika i silnika (21)
- Volvo C30 (2007–2013)2007–2011
- Volvo C30 (2007–2013)2012Wszystkie silniki oprócz: D4162T, D5204T, D5204T5
- Volvo C30 (2007–2013)2013Tylko silnik: B4204S3, B4204S4, B5254T7
- Volvo C30 Electric (2011–2013)2011–2013
- Volvo C70 (2006–2013)2006–2011
- Volvo C70 (2006–2013)2012–2013Tylko silnik: B5254T7
- Volvo S40 (2004–2013)2004–2010
- Volvo S40 (2004–2013)2011–2012Wszystkie silniki oprócz: D4162T, D5204T, D5204T5
- Volvo S60 (2001–2009)2002–2009
- Volvo S80 (1999–2006)2002–2006
- Volvo V50 (2004–2013)2004–2010
- Volvo V50 (2004–2013)2011–2012Wszystkie silniki oprócz: D4162T, D5204T, D5204T5
- Volvo V70 (2000–2008)2002–2008
- Volvo V70 XC / XC70 (2001–2007)2002–2007
- Volvo XC90 (2003–)2003–2004, 2015
- Volvo XC90 (2003–)2005–2006Wszystkie silniki oprócz: B8444S
- Volvo XC90 (2003–)2007Tylko silnik: B5254T2, D5244T4
- Volvo XC90 (2003–)2008–2010Wszystkie silniki oprócz: B6324S, B8444S
- Volvo XC90 (2003–)2011Wszystkie silniki oprócz: B6324S5, B8444S
- Volvo XC90 (2003–)2012Wszystkie silniki oprócz: B6324S5
- Volvo XC90 (2003–)2013–2014Tylko silnik: B5254T9
Co oznacza ten kod błędu?
The brake control module (BCM) has registered that the voltage supplied to it is too low. The module needs a stable supply to work, and at low voltage ABS and other stability functions are switched off.
Możliwe przyczyny
- Poor contact in the connections
- Battery voltage too low
- Fault in the charging system
- Open circuit or short to ground in the supply wire
- Blown fuse in the circuit or interference on the wiring
- Defective brake control module (uncommon)
Co możesz zrobić
- 1Read the code, clear it and road test to see whether it returns
- 2Check that the battery is charged and that its terminals are tight
- 3Check the fuse for the brake module supply and the connectors at the brake control module for contact resistance and oxidation
- 4Read the voltage to the brake control module with diagnostic equipment and check the charging system if needed
- 5The brake system is safety critical: have a workshop fix the fault promptly, and do not work on the brake control module or its wiring yourself
Objawy, które możesz zauważyć5
- General warning lamp on
- ABS warning lamp on
- The brake circuit does not work and the warning lamp comes on
- ABS, traction control and stability function do not work
- Information lamp on or traction control does not work
Na co może wpływać usterka2
- ABS is disabled
- Traction control, stability control, active yaw control (AYC) and brake assist are disabled
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.