VOLVO
BCM-0076 - Control module. Faulty configuration
Układ
Sterownik układu hamulcowego (BCM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
10 modeliC30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), S80 (1999–2006), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Pokaż modele wg rocznika i silnika (21)
- Volvo C30 (2007–2013)2007–2011
- Volvo C30 (2007–2013)2012Wszystkie silniki oprócz: D4162T, D5204T, D5204T5
- Volvo C30 (2007–2013)2013Tylko silnik: B4204S3, B4204S4, B5254T7
- Volvo C30 Electric (2011–2013)2011–2013
- Volvo C70 (2006–2013)2006–2011
- Volvo C70 (2006–2013)2012–2013Tylko silnik: B5254T7
- Volvo S40 (2004–2013)2004–2010
- Volvo S40 (2004–2013)2011–2012Wszystkie silniki oprócz: D4162T, D5204T, D5204T5
- Volvo S60 (2001–2009)2002–2009
- Volvo S80 (1999–2006)2002–2006
- Volvo V50 (2004–2013)2004–2010
- Volvo V50 (2004–2013)2011–2012Wszystkie silniki oprócz: D4162T, D5204T, D5204T5
- Volvo V70 (2000–2008)2002–2008
- Volvo V70 XC / XC70 (2001–2007)2002–2007
- Volvo XC90 (2003–)2003–2004, 2015
- Volvo XC90 (2003–)2005–2006Wszystkie silniki oprócz: B8444S
- Volvo XC90 (2003–)2007Tylko silnik: B5254T2, D5244T4
- Volvo XC90 (2003–)2008–2010Wszystkie silniki oprócz: B6324S, B8444S
- Volvo XC90 (2003–)2011Wszystkie silniki oprócz: B6324S5, B8444S
- Volvo XC90 (2003–)2012Wszystkie silniki oprócz: B6324S5
- Volvo XC90 (2003–)2013–2014Tylko silnik: B5254T9
Co oznacza ten kod błędu?
At the factory the brake control module (BCM) receives software that suits several car models. At the first ignition cycle it reads the car's settings from the central electronic module (CEM) and adapts itself to the car's model and equipment. The fault occurs if a module from another model or software for another model has been fitted or downloaded.
Możliwe przyczyny
- A brake control module from another car model has been fitted
- A central electronic module (CEM) from another car model has been fitted
- Software for another model or brake system type has been downloaded to the brake control module
Co możesz zrobić
- 1Check whether codes are stored in the central electronic module (CEM); deal with any there first, as an incorrectly configured CEM can affect the brake control module
- 2Check that the correct brake control module and central electronic module are fitted to the car
- 3Have a workshop read the software version and check that it matches the car's configuration; if it does not, the correct software must be downloaded
- 4The brake system is safety critical: do not work on the brake control module or its software yourself, and have a workshop repair the fault
Objawy, które możesz zauważyć5
- Anti-spin and stability function do not work
- Anti-skid does not work
- Information lamp on
- Traction control does not work
- General warning lamp on in newer cars
Na co może wpływać usterka2
- Traction control and stability control are disabled
- Active yaw control (AYC) is disabled
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.