VOLVO
BCM-0092 - Yaw rate sensor. Faulty signal
Układ
Sterownik układu hamulcowego (BCM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
10 modeliC30 (2007–2013), C30 Electric (2011–2013), C70 (2006–2013), S40 (2004–2013), S60 (2001–2009), S80 (1999–2006), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Pokaż modele wg rocznika i silnika (21)
- Volvo C30 (2007–2013)2007–2011
- Volvo C30 (2007–2013)2012Wszystkie silniki oprócz: D4162T, D5204T, D5204T5
- Volvo C30 (2007–2013)2013Tylko silnik: B4204S3, B4204S4, B5254T7
- Volvo C30 Electric (2011–2013)2011–2013
- Volvo C70 (2006–2013)2006–2011
- Volvo C70 (2006–2013)2012–2013Tylko silnik: B5254T7
- Volvo S40 (2004–2013)2004–2010
- Volvo S40 (2004–2013)2011–2012Wszystkie silniki oprócz: D4162T, D5204T, D5204T5
- Volvo S60 (2001–2009)2002–2009
- Volvo S80 (1999–2006)2002–2006
- Volvo V50 (2004–2013)2004–2010
- Volvo V50 (2004–2013)2011–2012Wszystkie silniki oprócz: D4162T, D5204T, D5204T5
- Volvo V70 (2000–2008)2002–2008
- Volvo V70 XC / XC70 (2001–2007)2002–2007
- Volvo XC90 (2003–)2003–2004, 2015
- Volvo XC90 (2003–)2005–2006Wszystkie silniki oprócz: B8444S
- Volvo XC90 (2003–)2007Tylko silnik: B5254T2, D5244T4
- Volvo XC90 (2003–)2008–2010Wszystkie silniki oprócz: B6324S, B8444S
- Volvo XC90 (2003–)2011Wszystkie silniki oprócz: B6324S5, B8444S
- Volvo XC90 (2003–)2012Wszystkie silniki oprócz: B6324S5
- Volvo XC90 (2003–)2013–2014Tylko silnik: B5254T9
Co oznacza ten kod błędu?
Applies only to cars fitted with DSTC. The yaw rate sensor in the AYC sensor tells the brake control module how fast the car is rotating about its vertical axis. The code is set when the signal is faulty, which is most often due to a broken or shorted wire to the AYC sensor or an internal fault in the sensor.
Możliwe przyczyny
- Open circuit or short to ground in the wiring to the AYC sensor
- Internal fault in the AYC sensor
- Internal fault in the stability sensor (BSC)
Co możesz zrobić
- 1Check the wiring between the connector and the AYC sensor for open circuits and short circuits to ground
- 2Read the yaw rate sensor value with diagnostic equipment and judge whether it is plausible
- 3If the value is wrong, the AYC sensor may need replacing by a workshop
- 4The brake system is safety critical: do not replace the brake control module for this code, and do not work on the stability sensor yourself
Objawy, które możesz zauważyć5
- Anti-spin does not work
- Stability function does not work
- Anti-skid does not work
- Information lamp on
- Traction control does not work
Na co może wpływać usterka3
- Traction control (TC) and stability control (SC) are disabled
- Active yaw control (AYC) is disabled
- Roll stability control (RSC) is disabled on cars that have it
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.