VOLVO
CPM-U210100 - Control Module Configuration Incompatible. General Failure Information. No sub type information
Układ
Ogrzewanie postojowe (CPM)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
9 modeliS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Co oznacza ten kod błędu?
The heater control module has a configuration that does not suit the car. It compares its configuration with the one stored in the central electronic module, and the difference sets the fault code. This may be because the heater is intended for a different fuel type from the car, because the control module comes from another car, or because the vehicle configuration is wrong. The heater's function is blocked.
Możliwe przyczyny
- The heater is intended for a petrol-engined car but has been fitted in a diesel car, or the other way round
- The heater control module is not intended for this car, for example a used module with other software or hardware
- The vehicle configuration from the central electronic module is incorrect
Co możesz zrobić
- 1Check whether the heater is intended for the car's engine type, petrol or diesel, by reading the label on the heater.
- 2If you have a diagnostic tool: erase the fault code, switch the ignition off for a while and switch it on again. Then check whether the code returns.
- 3If the wrong type of heater is fitted, have a workshop replace the whole heater unit.
- 4If the fault remains, have a workshop download the correct software to the heater and, if needed, to the central electronic module.
Objawy, które możesz zauważyć4
- The parking heater does not work
- The heat does not get hot enough in the rear section
- The heat does not get hot enough in the front section
- The heater does not work with the temperature control
Na co może wpływać usterka1
- The heater's function is blocked
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.