VOLVO
POT-C102267 - Boot/Trunk Secondary Switch. Algorithm Based Failures. Signal incorrect after event
Układ
Sterownik elektrycznej klapy bagażnika (POT)
Modele Volvo, których dotyczy ten kod błędu
Dotyczy następujących modeli:
3 modeleV70 (2008–), XC60 (2009–), XC70 (2008–)
Pokaż modele wg rocznika i silnika (3)
Co oznacza ten kod błędu?
The sensor for the tailgate's outer lock position (sensor 2) does not change its value when the lock unit is opened or closed, or the closing sequence takes too long. The tailgate control module (POT) judges this as an incorrect signal.
Możliwe przyczyny
- Damaged sensor 2 for the outer lock position
- Damaged tailgate opening motor, where the motor runs but the tailgate does not move
- Open circuit on the signal line from sensor 2
- Damaged tailgate lock unit
Co możesz zrobić
- 1Read off and clear the fault code, test drive and see whether it returns
- 2If you have a diagnostic tool: check that sensor 2 changes status at the end of a tailgate closing
- 3Check that the tailgate moves all the way when the motor runs, since the motor can run without the tailgate moving
- 4Use a multimeter to check that the signal line from sensor 2 has no break
- 5Check that the connectors at the lock unit and the control module are firmly seated and free from oxidation
- 6If the wiring is intact: have a workshop replace the lock unit
Objawy, które możesz zauważyć4
- The tailgate is hard to open
- The tailgate is hard to close
- The central locking for the tailgate does not work
- Automatic opening and closing of the tailgate does not work
Ogólne wskazówki dla właścicieli. Diagnostyka na samochodzie może wskazać inną przyczynę.