P0011, P0016, P164D Audi 2.0 TFSI EA888 – Kamaxelbrygga med Sil & Backventil Technical Diagnostic Guide

Diagnostic Priority: High

Complexity Level: Advanced

Technical diagnostic guide for AUDI 2.0 TFSI EA888 Gen2 covering fault codes P0011, P0016, P164D. Factory live data tolerances and repair procedures.

Vehicle

AUDI

Codes

3 units

Analysis Type

Technical Expert

Status

Analyzed

Technical Analysis

REF: #07FDD0

The fault combination P0011, P0016, P164D on AUDI 2.0 TFSI EA888 Gen2 indicates a validated failure requiring systematic signal and mechanical tolerance checks.

Expected Symptoms

Check engine light illuminated with sudden boost drop under hard acceleration on AUDI (DTCs: P0011, P0016, P164D)

Rough idle and sluggish throttle pickup from a dead stop

Misfiring and hesitation during high-speed highway overtaking (2,500–3,500 RPM)

System Impact

Drivetrain

Engine Control

Emission Control

Potential Fault Sources

01Sticking electronic wastegate actuator or heavy carbon buildup on intake valves (affecting AUDI subsystem for P0011, P0016, P164D)

02Boost control solenoid N75 leakage or split charge air hose

03Ruptured diaphragm in PCV oil separator assembly (logged fault: P0011)

Workflow / Methodology

Verify supply voltage and sensor telemetry for P0011, P0016, P164D on AUDI with multimeter at key ON.

Measure wastegate position feedback voltage at key ON: normal 3.5–3.9 V in closed position.

Smoke-test induction system and boost plumbing at 1.2 bar to pinpoint leaks.

Check crankcase depression with digital manometer at warm idle (-100 to -150 mbar).

Live Data & Mätvärdestoleranser (Är/Bör-värden)

Fabriksgodkända referensvärden vid diagnos och live-avläsning

Mätvärdesblock

Parameter / Signal	Testvillkor	Bör-värde (Normalt)	Avvikelse / Varning
Oljetryck Kamaxelbrygga	2000 rpm	2.0 – 3.0 bar	< 1.4 bar
Laddtryck Bör vs Är	Fullgas 3 000 rpm	2 100 – 2 400 hPa abs	Avvikelse > 250 hPa
Wastegate Ändlägesspänning	Tändning på	3.50 – 3.90 V	< 3.20 V eller > 4.10 V

Assessment & Action Proposal

Technical Recommendation

Byte av kamaxelbrygga med integrerad backventil och ny kamaxelsolenoid. (1:1 Cloning available for ECU/TCU failures).

Need a deeper analysis? Use our advanced fault code analyzer to find likely connections and in-depth guidance.

Start Fault Code Analyzer

Vanliga frågor om dessa felkoder

Vad är den primära orsaken till felkoderna?

The fault combination P0011, P0016, P164D on AUDI 2.0 TFSI EA888 Gen2 indicates a validated failure requiring systematic signal and mechanical tolerance checks.

Kan man köra vidare med tänd motorlampa / varningslampa?

Körning med aktiva felkoder kan leda till strypt motoreffekt (nödläge / Limp Home), blockerad partikelfilterregenerering eller följdskador på mekaniska komponenter. Felsökning bör genomföras omgående.

Hur åtgärdas kombinationen på säkrast sätt?

Byte av kamaxelbrygga med integrerad backventil och ny kamaxelsolenoid. (1:1 Cloning available for ECU/TCU failures).